Indoarch O&MProdukPortable Total Organic Carbon Analyzer (TOC)

Portable Total Organic Carbon Analyzer (TOC)

 

 

Parameters:
•     Requirements on Working Environments
•     1. Power supply: AC 220V/50Hz
•     2; Power: 1000W (when the furnace’s temperature rises)
•     3. Ambient temperature: 0~40 ℃
•     4. Relative humidity: 10—85%
•     5. Set places: indoor
•     6; Gas source: High purity oxygen(≥99;999%)
•     7; High purity water: No carbon dioxide in water (TOC≤0;5mg/L)
•     8. Acid reagent: 10% phosphoric acid
•     9. Instrument placement: there should be 20cm space around for heat
•     dissipation. No items is allowed to be stacked above.


Main technical indicators:
•     1. Measuring range: 0 ~ 1000mg / L (by diluted up to 0 ~ 30,000 mg / L)
•     2. Detection limit: 0.5mg / L (For reference)
•     3; Reproducibility: ≤ 3% (5mg / L or more) ≤ 5% (5mg / L or less)
•     4; Indication error: ≤ 3% (5mg / L or more) ≤ 5% (5mg / L or less)
•     5.Linear: R2> 99.9%
•     6. Response time: 1 to 4 minutes
•     7; Injection volume: 10μL ~ 1000μL
•     8; Carrier gas: oxygen (≥ 99;995%)
•     9.Interface: Carrier inlet: Φ8 PC connection: RS232 External Storage: USB
Insttruction:
•     HTY-CT1000M Total Organic Carbon Analyzer applies 680℃ catalytic
•     combustion oxidation technique. It imports the sample together with the
•     cleaned gas (high purity oxygen) to the high temperature combustion
•     tube and low temperature reaction tube. After going through the high
•     temperature combustion tube, the organic carbon and inorganic carbon
•     among the sample are converted into carbon dioxide by
•     high-temperature catalytic oxidation,and after going through the low
•     temperature reaction tube, the inorganic carbon among the sample is
•     converted into carbon dioxide by acidification. Both kinds of carbon
•     dioxide produced in the reaction tube are imported into non-dispersive
•     infrared gas detector NDIR sequentially, where the CO2 will be detected.
Feature :

•     1. A data terminal can be configured at most eight detection units so that the analyzer can detect eight points simultaneously.
•     2. It realized the function of online multi-point, continuous testing on the water supply system ; which is cost-effective , ease to operate, and can reduce the workload.
•     3. 8 monitoring points data are displaying together, and can be centralized-controlled; and it displays TOC, conductivity and temperature values at the same time.
•     4. Analysis interval time and data storage interval can be set arbitrarily .
•     5. With automatic limit alarm output function, it reminds the operator timely when data anomalies.
•     6. With deadline countdown function of the UV light, it calculates the UV lamp usage time accurately.
•     7. Data can be stored and for reference , and it can save more than 5 years’ data;
•     8. With USB interface, can export data through the U disk.
•     9. A print output.
•     10. Detection mode can be switched off for testing, calibration and validation.
•     11. Without adding acid reagent, oxidants, and any gas, no additional maintenance fees.
•     12. It is simple, fast, and reliable to operate, and users do not need expertise and specialized training.
•     13. Small size, light weight, low energy consumption.
•     14. With water splash preventing design, it can work in wet and high temperatures conditions.
•     15. Compact cabinet designed to meet the demanding requirements of the industrial environment.
•     16. Easy to do the system suitability test that follows USP <643> and
•     EP <2.2.44> and the Chinese Pharmacopoeia Appendix Ⅷ R: TOC detection methods requirements.
Application:
•     TOC detection of surface water, groundwater, sewage, industrial
•     wastewater , used in environmental monitoring, urban drainage,
•     disease control, chemical and power industries.

         1. A data terminal can be configured at most eight detection units so that

         the analyzer can detect eight points simultaneously.

         2. It realized the function of online multi-point, continuous testing on

         the water supply system ; which is cost-effective , ease to

         operate, and can reduce the workload.

         3. 8 monitoring points data are displaying together, and can be

         centralized-controlled; and it displays TOC, conductivity and

         temperature values at the same time.

         4. Analysis interval time and data storage interval can be

         set arbitrarily .

         5. With automatic limit alarm output function, it reminds the operator

         timely when data anomalies.

         6. With deadline countdown function of the UV light, it calculates the

         UV lamp usage time accurately.

         7. Data can be stored and for reference , and it can save more than

         5 years’ data;

         8. With USB interface, can export data through the U disk.

         9. A print output.

         10. Detection mode can be switched off for testing, calibration

         and validation.

         11. Without adding acid reagent, oxidants, and any gas, no additional

         maintenance fees.

         12. It is simple, fast, and reliable to operate, and users do not need

         expertise and specialized training.

         13. Small size, light weight, low energy consumption.

         14. With water splash preventing design, it can work in wet and

         high temperatures conditions.

         15. Compact cabinet designed to meet the demanding requirements

         of the industrial environment.

         16. Easy to do the system suitability test that follows USP <643> and

         EP <2.2.44> and the Chinese Pharmacopoeia Appendix R: TOC

         detection methods requirements.

Application:

         TOC detection of surface water, groundwater, sewage, industrial

         wastewater , used in environmental monitoring, urban drainage,

         disease control, chemical and power industries.

Hubungi Kami

PT Trisulua Adhi Nastiti

The Manhattan Square Building,
Mid Tower 12th Floor Unit F.
Jl. TB. Simatupang Kav 1-S,
Jakarta 12560
Tel : 021-30050937/021-30050943
Fax : 021-30050937
HP : +6281213707918
Email : widij.indoarch@gmail.com
         maintenance.tanom@gmail.com